[PATCH] apne: use time_after()

From: Marcelo Feitoza Parisi <marcelo@feitoza.com.br>

It deals with wrapping correctly and is nicer to read.

Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Index: linux-kj/drivers/net/apne.c
===================================================================
--- linux-kj.orig/drivers/net/apne.c	2005-10-28 16:25:11.000000000 +0400
+++ linux-kj/drivers/net/apne.c	2005-10-28 16:29:46.000000000 +0400
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -216,7 +217,7 @@ static int __init apne_probe1(struct net
 	outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
 
 	while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
-		if (jiffies - reset_start_time > 2*HZ/100) {
+		if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 			printk(" not found (no reset ack).\n");
 			return -ENODEV;
 		}
@@ -382,7 +383,7 @@ apne_reset_8390(struct net_device *dev)
 
     /* This check _should_not_ be necessary, omit eventually. */
     while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
-	if (jiffies - reset_start_time > 2*HZ/100) {
+	if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 	    printk("%s: ne_reset_8390() did not complete.\n", dev->name);
 	    break;
 	}
@@ -530,7 +531,7 @@ apne_block_output(struct net_device *dev
     dma_start = jiffies;
 
     while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
-	if (jiffies - dma_start > 2*HZ/100) {		/* 20ms */
+	if (time_after(jiffies, dma_start + 2*HZ/100)) {	/* 20ms */
 		printk("%s: timeout waiting for Tx RDC.\n", dev->name);
 		apne_reset_8390(dev);
 		NS8390_init(dev,1);